Mounting flagpole to Prado VX

Post Reply
User avatar
Iqsaan
Intermediate
Intermediate
Posts: 0
Joined: Mon Jan 14, 2013 5:47 pm

I need advice on mounting a flagpole to my 2007 Prado VX... this is the model with the tyre under the vehicle.
Thanks !
Top
User avatar
alshamsi_m
Founder
Founder
Posts: 840
Joined: Fri Aug 10, 2007 8:29 am
Location: Al Hamriyah
Has thanked: 945 times
Been thanked: 973 times
Contact:
Contact alshamsi_m

Hello Iqsaan

Please have a look at the following link ... It might help

http://www.almost4x4.com/vb/showthread. ... t=flagpole

Best Regards
Adventurous League of Mountains, Oceans and Sand Thrills
Top
User avatar
CAMEL
Intermediate
Intermediate
Posts: 0
Joined: Tue Jan 31, 2012 1:15 pm

Hi Everybody!!!

Maybe most of us would have used it, but thought i would share for the benefit of others.

I have used the fevicol steel epoxy available for AED 5 in a number of applications.
[IMG]https://dl.dropbox.com/u/33932054/%24%2 ... ~60_35.JPG[/IMG]

I have used it to make a Flag pole mount, This is what i did..

[IMG]https://dl.dropbox.com/u/33932054/20130204_135925.jpg[/IMG]

I used a Air Hose coupler as a quick release....

[IMG]https://dl.dropbox.com/u/33932054/20130204_140006.jpg[/IMG]


[IMG]https://dl.dropbox.com/u/33932054/20130204_140014.jpg[/IMG]
I recently used it to make a camera mount where i needed to attach a rod to a suction cup.(Forgive the shabby job) But it creates a very strong hold, as good as welding.


[IMG]https://dl.dropbox.com/u/33932054/20130204_134418.jpg[/IMG]


The flag pole could be attached to the suction cup to create a quick release flag suction cup mount!!!
Top
Post Reply

Return to “Chitchat”